Megapox HX
Category: Megapox resin
Description

Megapox HX

HX
HX product is a 100% clear epoxy resin with low concentration, which is used to penetrate into the cracks and strengthen the stone, it is also very effective in grinding and polishing the stones. This resin can be used in marble, marble, granite, etc.
Application of HX Megapoxy stone glue

They are used to install all kinds of natural and artificial engineering stones on any substructure that can bear the weight of the stone, including brick, pottery, glass, metal, wood, cement, concrete, etc. These products have high strength against pressure and maintain their consistency at temperatures of +90°C to -30°C without tension and softening. Their use leads to building lightness. So that 10 tons of mortar is removed for every 100 square meters of building facade. Also, due to the way it is used in the form of biting in the four corners of the stone and a point (weld spot) in the middle of the stone, the weight of each stone is on the same stone, and because the center of the stone is the center of gravity, glue is used to the extent It prevents the cracking of the stone and increases the resistance of the building in the earthquake. These materials are fireproof due to the presence of minerals. More than 50% of the mineral salts present in this material do not allow oxygen to reach the glued tissue, so no special change is formed in the structure of this material when it comes into contact with fire. In other words, in case of fire and direct contact with it, it may change color, but it does not catch fire.

Another important feature of these products is saving time. The installation speed is 4 times faster than using mortar.

This paste-like material with a working time of 45 minutes and high strength is used to install all kinds of stones and connections.Megapoxy adhesive is a two-component, oxy-based adhesive. When this pasty material is properly thickened, it turns into a solid material. which is resistant to other chemicals and due to its very high strength, it creates a permanent chemical bond that does not undergo any chemical changes over time. At the same time, this glue is resistant to pressure and maintains its strength.

مگاپوکسی HX
مگاپوکسی HX

Technical information

 

Epoxy ester brand: Megapoxy
Color: clear liquid
Mixing ratio: 3 to 1
Working time: 30 minutes
Minimum holding time at 25: 5 hours
Complete curing: 48 hours at 25°C
Tensile strength: 40 Mpa
Shear tensile strength: 13 Mpa
Compressive strength: 95 Mpa

How to run:

Two components A and B are mixed together in the amount of three units of A and one unit of B and poured on the stone coupe that has small cracks, or on tile stones or slabs as mastic and used with a spatula.

مگاپوکسی HX
×

سلام

 

× Product consultation